Truskin Gloves

Truskin Gloves

100% subsidiary of Sutures India

Quick Contact
+ - -
+91 8056085746
Polymer Coated Surgical Gloves
polymer coated surgical gloves, polymer coated gloves manufacturer, polymer coated gloves supplier, polymer coated gloves exporter, polymer coated surgical gloves
Key Features
Type Gamma ray / Ethylene oxide sterilized; Low powdered or Powder free.
Material High quality Natural Rubber Latex.
Design & Features Hand specific; curved fingers; beaded cuff; polymer coated to facilitate easy donning.
Storage The gloves shall maintain their properties when stored away from direct lights & UV-light, in a cool & dry condition at temperature not higher than 30°C.
Moisture Content below 0.3% per glove.
Shelf-life 5 years from date of manufacturing.

Several coating technologies have been developed to reduce the amount of powder or to replace powder used in the manufacturing of medical gloves. Historically, powder has been used to facilitate the release of gloves from formers during glove forming and to aid in glove donning. However, polymer coatings in combination with chemical lubricants are often applied to the glove surface to provide optimum wet and dry donning capabilities.

Functional Benefits

  •   Extra strength to protect the surgeons while performing operation.
  •   Fully anatomical design to reduce hand fatigue and improve finger dexterity.
  •   Ensures natural fit and supple feel.
  •   Excellent wet and dry grip from micro—roughened surface.
  •   Easy donning and protects cuff portion also with the extra length.
  •   High strength and elasticity.
  •   Powder quantity <2mg per glove.
Quality Standards
Conforms to ASTM D3577, IS 13422 and EN455 Standards.
Quality Management System Conforms to QSR (GMP) and ISO 13485:2003.
Sterilized by Ethylene Oxide/ Gamma ray irradiation.
Bioburden and sterility tested.
Glove Sizes
Sizes 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 .
Tests Performed ASTM D 3577 / IS 13422 Standard Spec for Truskin Gloves
Length (mm) Sizes 6 ± 8 1/2 Min 265 Min 280
Width (mm) 6 76 ± 6 78 ± 80
6 1/2 83 ± 6 86 ± 88
7 89 ± 6 92 ± 93
7 1/2 95 ± 6 98 ± 100
8 102 ± 6 105 ± 107
8 1/2 104 ± 6 106 ± 108
Thickness (mm) Finger 0.10 Min 0.19 Min
Palm 0.10 Min 0.17 Min
Cuff 0.10 Min 0.13 Min
Tests Performed ASTM D 3577 / IS 13422 Standard Spec for Truskin Gloves
Before ageing Tensile Strength (Mpa) 24.0 Min Min 27
Stress at 500% Elongation (Mpa) 5.5 Max Max 5
Elongation At Break (%) 750 Min Min 800
After Ageing Tensile Strength (Mpa) 18.0 Min Min 24
Elongation At Break (%) 560 Min Min 750
Water Tightness Test G-1, AQL 1.5 Max 10 holes in 315 pairs Max 7 holes in 315 pairs (1 AQL)
Protein Content, Max 50 µg/ dm2 100